Washing and Disinfection Devices
Washer and Disinfectors
 

Our product has been designed to be used for washing and disinfection of heat-resistant and reusable medical devices tools. It is used in the following:

 

Hospitals,
Outpatient clinics,
Rehabilitation centers,
It is used in laboratories.

 

It must be used by the expert technical personnel who have completed the required training for washing and disinfection process.

 

Packaging and Loading

 

Packaging material must not be used in washing and disinfection procedure. Instead, a cart and a basket suitable for the materials to be washed. Materials/tools must not be placed one over another or stuffed together when placing them within suitable baskets. Same types of materials must be placed together to the extent possible, and loading cart or racks must be used.

 

 

 

Materials that can be subjected to washing and disinfection Programs Used and Times

 

Surgical tools
Operating room containers
Laboratory tools
Glass containers
Rubber materials
Plastic materials

 
USED PROGRAMS AND TIMES
+ SHORT
CYCLE
STANDARD
CYCLE
LONG
CYCLE
DRYING
CYCLE
SELF
DISINFECTION
CYCLE
Temp
(C)
Time
(S)
Temp
(C)
Time
(S)
Temp
(C)
Time
(S)
Temp
(C)
Time
(S)
Temp
(C)
Time
(S)
Pre-washing-1 - - 30 120 30 120 - - - -
Pre-washing-2 - - - - - - - - - -
Washing 50 300 50 300 50 300 - - - -
Rising-1 40 300 40 300 40 300 - - - -
Rising-2 - - - - 40 180 - - - -
Rising-3 - - - - - - - - - -
Disinfection 93 300 93 300 93 300 - - 93 300
Drying 60 1500 60 1500 60 1500 50 600 60 1500
General Characteristics

 

Control System: Electronic Board
Way of use Full automatic/ buttons and touch screen
Screen Type: Color TFT, Touch LCD
Screen Dimensions: 7"
Keypad: Touchpad
Printer: Thermal printer with 40 characters/ lines (Optional)
Communication: RS 232 Port / USB , Ethernet
Warning System: Warning with audiovisual and written messages
Data Storage 200 cycles
Procedure Follow-up/ Tracing Touch screen
Mobility Easy orientation with 4 swivel castors and with adjustable heights According to the inclination of the floor
Water Consumption ~120 L /cycle
Structural Characteristics

 

Body 2,5 mm, AISI 304 Stainless Steel
Cabin 1,5 mm, AISI 316L Stainless Steel
Door Tempered Glass
Panel Coating 1,5 mm, AISI 304 tainless Steel
Silicone Hose, 1,5 mm, AISI 304
Piping Stainless Steel
Chamber Polishing Electro-polishing

 

Installation Requirements

 

Water De-ionized water with Reverse Osmosis
is recommended for high performance.
Installation Power for
200L
~ 20kW, 3 Phase, 380 VAC ±10
Installation Power for
250L-360L
~ 25kW, 3 Phase, 380 VAC ±10
Installation Power for
500 L
~ 2 ,5kW, 3 Phase, 380 VAC ±10
Relevant Directives and Standards

 

Medical Device Directive MDD 93/42/EEC - 2007/47/EC
Medical Device Class Class IIb, acc. to EC MDD 93/42/
EEC 2007/47/EC (Annex IX)
Low-voltage Directive 2014/35/EU
EN 60601-1
Electromagnetic Compliance
Directive
2014/30/EU
EN 60601-1-2
Washing and Disinfection
Devices
EN 15883-1 Series Standards
Quality Management
System Requirements
ISO 9001
Medical Devices Regulatory ISO 13485
Environment Management System ISO 14001

 

Pressure

 

Measurement 2 Pressure Sensors
Sensor Positions Cabin (1), Air (1)
Safety and Quality

 

It protects the user against current leaks.
It has short circuit protection.
It is equipped with safety valve protection.
HEPA filter is used for fresh air.
It has password protection.
A system preventing the opening of both doors simultaneously is used in models with double doors.
An emergency button is provided.

 

 

Temperature

 

Operation Range 15 oC ̰ 110 oC
Measurement 3xPT100 (DIN A Class) Sensor
Sensor Positions Cabin (2), Water (1)
 
Technical Data

 

 

 
 
 
Models ADELA-WD 200 ADELA-WD 250 ADELA-WD 360 ADELA-WD 500 ADELA-WD 200 ADELA-WD 250
Large Automatic Sliding Door Capacity Large Manual Door Capacity
Chamber Volume (L) 200 250 360 500 200 250
Chamber Depth (mm) 600 600 835 835 735 735
Chamber Height (mm) 582 720 720 870 585 725
Chamber Width (mm) 618 618 618 618 625 625
Device Depth (mm) 825 825 1060 1060 1000 1000
Device Height (mm) 1860 1960 1960 2010 1870 2010
Device Width (mm) 855 855 855 1100 885 885
Packing Depth (mm) 1025 1025 1260 1260 1200 1200
Packing Height (mm) 2060 2160 2160 2190 2070 2190
Packing Width (mm) 1055 1055 1055 1300 1085 1085
Single Door + + + + + +
Double Door + + + + + +
Touchscreen 7" 7" 7" 7" 7" 7"
RS232 + + + + + +
Water Heat Resistance (KW) 9 9 12,5 12,5 12,5 12,5S
Drying Resistance (KW) 5,7 5,7 5,7 5,7 6 6
Drying Engine Fan Blowing Flow (m3/h) 150 150 150 150 150 150
Circulation Power Pump (KW) 1,4 1,4 2,55 2,75 1,4 1,4
Circulation Pump Electrical Connection
Features
380V ± 10 380V ± 10 380V ± 10 380V ± 10 380V ± 10 380V ± 10
Circulation Pump Flow (d/d) 600 600 800 950 650 650
Detergent Dosage Pump + + + + + +
Neutralizing Dosing Pump + + + + + +
Electrical Connection 3N+1 50 Hz, 380 V 3N+1 50 Hz, 380 V 3N+1 50 Hz, 380 V 3N+1 50 Hz, 380 V 3N+1 50 Hz, 380 V 3N+1 50 Hz, 380 V
Water Drain Pipe Diameter (mm) 25 25 25 25 25 25
Basket Layer Quantity 4 5 5 6 4 5
DIN Basket 8 12 15 18 8 12
Hepa Filter H14,Particle Retention Ratio %99,999

Videos

 
Sümer A.Ş. Introduction Movie
 
Autoclave Sterilization Device
Operating Tables
Nitrogen Generator
Oxygen Generator
Warming Cabinets
Washer Disinfectors