Easy-to-use and ergonomic design suitable for General Surgery procedures

Design to provide the safety of the patient and the operation team

Possibility of ensuring the silent and no-vibration up and down, back piece, Trendelenburg and reverse Trendelenburg, right and left, lateral and horizontal back and forth (sliding) movements of the table using the hand control

Possibility of manual foot piece movements with the help of gas spring

Mechanical usage in head section Electro-hydraulic power control system

Design suitable for various patient positions and movements of the X-Ray devices with C-arms

A rail system for fixing and tightening of all the accessories

Possibility of positioning the table parallel to the floor (except for the head and foot pieces) by pressing one key on the hand control Possibility of saving the required positions in the memory

Radiographic tabletop set made from compact laminate material

The spare control system on the table body Easy use under fluoroscopy

Possibility of fixing the foot piece in place of the head piece

The mattress on the table is made from multi-layer visco material and is antistatic, impermeable for fluids and antibacterial with a thickness of 60 mm

It is impermeable against any and all fluids including blood

Possibility of use for min 60 minutes (capability of 200 movements in the average) in case of power failure thanks to the rapidly charging and no-maintenance battery system (12 A/hr- 24 vDC)

Possibility of flex and re-flex movements with one key on the hand control

The upper supporting panel is made from aluminum, body and lower coating is made from AISI 304 quality stainless steel, the lower panel and the bearing body is made from GGG 40 material

A silent and no-vibration electro-hydraulic motor system has been provided to ensure movements allowing various patient positions. Featuring the fixation on the floor on four points with the help of electro-hydraulic pistons controlled by the hand control and the controls on the body

Possibility of being lowered down to minimum 530 mm (mattress excluded) and being raised up to maximum 1000 mm

Stand-by feature when the table is not in use. Possibility of showing the movements of the table on the LCD screen of the hand control

In addition, backlighting for the keys on the hand control

Standard
 

The mattress is made from multi-layer visco material, and is antistatic, fluid-impermeable and antibacterial, and is 60mm thick.

Optional
 

80 mm, soft upper panel made from visko material, polyurethane middle panel, rubber base, waterproof, antibacterial, antistatic, fixed onto the table with velcro bands.